DAP DCP-26 MKII

4 050 kr

Digitalt delningsfilter 2-in, 6-ut

Artikelnr: D2084 Kategori: Varumärke:

Beskrivning

  • 48 kHz, 64 Bits Sample rate
  • 5 parametric EQs each in- and output
  • Limiter, delay, reverse and volume control
  • USB interface and user-friendly software included
  • 50 User Presets

The DAP DCP-26 MKII is a 6-channel digital crossover, suitable for your 6-part sub/top speaker combination. It is equipped with a variety of functions, such as a 5-band equalizer, volume control, X-over, reverse, limiter and delay. This allows you to achieve optimal sound quality at any location.

In one view you have insight into all the necessary information thanks to audio signal indicators for inputs and outputs in combination with an LCD display. The DCP-26 MKII is suitable for PA as well as line arrays, audio installations and sound distribution networks.

Using the DAP DSP Control software, available for Windows and MacOS, you can use advanced settings to fine-tune and protect your sound system. You can also easily save or recall presets. The DCP-26 MKII can be connected to your PC/laptop using a USB-A to USB-B cable.

Not familiar with speaker processors? Our DAP technicians will help you get started with the basic settings. Ask your supplier or contact person for help and you will receive the right guidance.

Specifications

Mono Inputs: 2
Mono Input Connector: 3-pin XLR
Mono Input Headroom: 110 dB
Mono Input Gain Range: 12 dB
Mono Balanced Input Maximum Level: 22 dBu
Mono Input Impedance: 10000 Ω

Main Outputs: 6
Main Output Connector: 3-pin XLR
Main Output Headroom: 114 dB

THD Level: < 0.01 %
Signal-to-noise Ratio: > 90 dB

Audio Latency: 1.27 ms
DSP Processor Bitrate: 64-bit
Frequency Response Minimum: 20 Hz
Frequency Response Maximum: 20000 Hz

Supported Operating Systems: Windows

Equalizer Range: 12 dB
Parametric Input Equalizer: 5 Bands
Parametric Output Equalizer: 5 Bands
Equalizer Types Input: Allpass, Bell, High Shelf, Low Shelf, Notch
Equalizer Types Output: High Shelf 6, High Shelf 12, Low Shelf 6, Low Shelf 12
Crossover Filter Types: Bessel, Butterworth, Linkwitz Riley
Crossover Slopes: 6, 12, 24, 48
Dynamics Type: Limiter
Phase Reverse: Yes
Limiter Treshold Minimum: -20 dB
Limiter Treshold Maximum: 20 dB
Limiter Release Time Minimum: 1 ms
Limiter Release Time Maximum: 100 ms
Output Delay (Max): 8 ms

User Presets: Yes
User Presets Capacity: 50

Control Mode: Manual, PC Software

Display: LCD

Power Supply: 220V-240 VAC 50 Hz
Output Voltage: 6 VDC
SMPS Included: Yes
Power Consumption: 2.9 W
Power Connector in: Low Voltage DC plug
Data Connector in: USB B
Cable Length: 1.5 m

Height (mm): 44 mm
Width (mm): 483 mm
Length (mm): 155 mm
Installation Depth (excl. connector): 155 mm
Flightcase Size: 19″
Rack Units: 1 U
Housing: Metal
Colour: Black
Weight (kg): 1.9 kg
IP Rating: IP20 (indoor use only)

LED Indicators: Clip, Input level, Operation mode, Output level, Signal

Included Cables: USB-A – USB-B cable
Included Accessories: Adapter, Software, User Manual

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”DAP DCP-26 MKII”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.