DAP DRX-15A

Beskrivning

• 250 W RMS, max SPL of 123 dB SPL @ 1 m
• Bi-amp
• Lightweight (22 kg)
• Handles for mobile use
• Reinforced cabinet

The DAP DRX-15A is an active full-range 15-inch speaker with a peak power of 500 watt (250 W RMS). This largest DRX model is intended for on-the-road use, suitable for music at medium-size parties and other gatherings. It’s a 2-way system that can deliver a maximum SPL of 123 dB at 1 m. For an enhanced bass performance we recommend to use the DRX-15A together with the DRX-18BA subwoofer.

The DRX-15A is ideal for mobile applications due to its lightweight, compact design with built-in handle, scratch-resistant black finish and 15 mm thick MDF. It therefore easily survives the rigours of frequent touring. Besides, the DRX-15A can be installed on a universal speaker stand due to its 35 mm pole mount.

The internal 500 watt amplifier is equipped with a XLR/Jack input and XLR line output connector, volume control and switchable ground lift. Accessoires are optional, such as speaker stands, distance tubes, cables and 8 mm hanging eyes.

Specifications

Low Driver Power: 220 W
High Driver Power: 30 W
RMS Output Power Amplifier: 250 W
Peak Output Power Amplifier: 500 W
Main Outputs: 1
Main Output Connector: 3-pin XLR

Mono Inputs: 1
Mono Input Connector: 3-pin XLR, TRS balanced 6.3 mm
Mono Unbalanced Input Maximum Level: 5 dBv
Mono Balanced Input Maximum Level: 1 dBu
Mono Input Impedance: 15000 Ω

THD Level: < 0.5 % Signal-to-noise Ratio > 80 dB
Amp Technology: Class AB
Damping Factor: 100 :1
Speaker System: 2-way
Speaker Sensitivity (1 W/1 m): 96 dB
Maximum SPL at 1 m: 123.5 dB
Frequency Response (-6dB) Minimum: 50 Hz
Frequency Response (-6dB) Maximum: 20000 Hz
Woofer Diameter: 15 ”
Woofer Voice Coil: 2 ”
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1 ”
Compression Driver Voice Coil: 1 ”
Compression Driver Magnet Type: Ferrite
Dispersion Angle Horizontal: 50°
Dispersion Angle Vertical: 50°

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 245 W
Fuse: 2 A
Power Connector in: IEC

Amplifier Cooling: Convection
Height (mm): 736 mm
Width (mm): 486 mm
Length (mm): 522 mm
Material: MDF
Material Thickness: 15 mm
Colour: Black
Finish: Painted
Weight: 24 kg
IP Rating: IP20 (indoor use only)

Pole Mount: 35 mm
Electronic Protection: Clip limiter (fixed), DC voltage, Thermal
LED Indicators: Clip, Power
Rotatable Horn: No
Useable as Monitor/Wedge: No
Speaker Grill Material: Steel
Speaker Handles Positions: Left side, Right side

Mounting Options: Eye bolt
Mounting Positions: Horizontal, Vertical
Rigging Options: Flying
Rigging Eye Thread: M8

Included Cables: IEC cable
Included Accessories: User Manual