Beskrivning
- 500 W RMS, 1000 W peak
- 50 – 170 Hz frequency range
- Internal DSP with 4 modes
- Seamless integration with NRG series active full-range speaker
- Lightweight (20.3 kg)
The DAP NRG-15SA is an active subwoofer with a peak power of 1000 watts (500 watts continuous RMS). It uses a 15” woofer with a dual 3” voice coil to deliver bass down to 50 Hertz (-6 dB). It has enough power to comfortably produce up to 121 dB. It has an internal DSP with 4 useful modes for integration with a full-range NRG speaker or a customisable crossover frequency. The internal class D amplifier has a switched-mode power supply to keep the weight down and efficiency level up. The internal DSP also provides protection against overload, short circuit and thermal protection. Two XLR combo jacks accept the audio signal, which is looped through to two XLR outputs for driving a full-range speaker or an additional subwoofer.
The rugged, lightweight plywood enclosure has an M20 threaded insert for mounting a speaker pole. To get the most out of the NRG-15SA, we recommend using it in combination with a full-range speaker from the NRG range.
Specifications
Power Amplifier RMS Output: 500 W
Power Amplifier Peak Output: 1000 W
Main Outputs: 2
Main Output Connector: 3-pin XLR
Mono Inputs: 2
Mono Input Connector: 3-pin XLR
THD Level: < 0.3 %
Signal-to-noise Ratio: > 95 dB
AD/DA Convertor Sample Rate: 48 kHz
Audio Latency: 1.2 ms
Amp Technology: Class D
Speaker System: Subwoofer
Speaker Sensitivity (1 W/1 m): 95 dB
Maximum SPL at 1 m: 121 dB
Frequency Response (-6 dB) Minimum: 50 Hz
Frequency Response (-6 dB) Maximum: 170 Hz
Woofer Diameter: 15″
Woofer Voice Coil Diameter: 3″
Woofer Magnet Type: Ferrite
Subwoofer Dispersion Angle (Horizontal): 360°
Subwoofer Dispersion Angle (Vertical): 180°
User Presets: Yes
User Presets Capacity: 4
Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 450 W
Power Connector In: Power Pro Blue
Height (mm): 590 mm
Width (mm): 430 mm
Depth (mm): 520 mm
Material: Plywood
Colour: Black
Weight: 25.5 kg
IP Rating: IP20 (indoor use only)
Pole Mount: M20
LED Indicators: BT Pairing, DSP Mode, Limit, Power, Protect, Signal
Speaker Handle Positions: Left side, Right side
Maximum Ambient Temperature: 40 °C
Maximum Surface Temperature: 50 °C
Included Cables: Power Pro Cable
Recensioner
Det finns inga recensioner än.