DAP ODIN S-218A

60 595 kr

Aktiv subwoofer, 2 x18”, 4000W

Artikelnr: D3902 Kategorier: , Varumärke:

Beskrivning

  • 4000 W / 141 dB SPL @ 1 m
  • 2x 18″ Celestion Ferrite Magnet subwoofer with 5″ voice coil
  • Class-D Amplifier
  • Configurable DSP-optimised amplification
  • Multi Voltage Power supply with active PFC

The DAP Odin S-218A is an extra bold, heavy weight Ultra Subwoofer suitable for medium to big crowds. It produces an awesome wall of sound with a frequency response as low as 28 Hz for an extremely low bass. The internal high-power 4 KW Class D amplifier has a peak output power of 10,000 watts. The subwoofer is intended to be used in combination with T-8A Line Array Satellites for a super punchy full-range sound.

The Odin S-218A is equipped with two 18″ Celestion Ferrite Magnet subwoofers containing 5″ voice coils producing up to a staggering 141 dB SPL @ 1 meter distance. The DSP settings are configurable to make sure that the S-218A delivers under any circumstance and in any setup.

Several DSP presets are available, including preset for “Cardioid” and “End Fire” mode. A great addition to the T-8A Satellite and S-18A Subwoofer to literally bring more punch and depth to your live shows.

Free Odin Editor software, in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and ”Throw”. A plug-in has been developed for adding our speakers to its database.

Please note that powerCON and network cables are not included but are to be ordered separately.

Specifications

Low Driver Power: 1600 W
RMS Output Power Amplifier: 4000 W
Peak Output Power Amplifier: 10000 W
Main Outputs: 1
Main Output Connector: 3-pin XLR
Mono Inputs: 1
Mono Input Connector: 3-pin XLR

THD Level: < 0.5 %
Signal-to-noise Ratio > 90 dB

AD/DA Convertor Sample Rate: 48 kHz
Amp Technology: Class D
Damping Factor: 200:1
Speaker System: Subwoofer
Speaker Sensitivity (1 W/1 m): 101 dB
Speaker Impedance: 8
Maximum SPL at 1 m: 141 dB
DSP Processor Bitrate: 32-bit
Frequency Response Minimum: 28 Hz
Frequency Response Maximum: 110 Hz
Frequency Response (-6dB) Minimum: 28 Hz
Frequency Response (-6dB) Maximum: 110 Hz
Crossover Frequency Low: 25 Hz
Crossover Frequency High: 90 Hz
Woofer Diameter: 18
Woofer Voice Coil: 5
Woofer Magnet Type: Ferrite
Subwoofer Dispersion Angle Horizontal: 360°
Subwoofer Dispersion Angle Vertical: 180°

Equalizer Range: 30 dB
Parametric Output Equalizer: 8 Bands
Crossover Filter Types: Butterworth
Crossover Slopes: 24 dB
Phase Reverse: Yes

User Presets: Yes
User Presets Capacity: 10

Control Mode: PC Software, Stand Alone

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 3100 W
Fuse: 6.3 A
Power Connector in: powerCON Blue
Power Connector out: powerCON Grey
Data Connector in: etherCON
Data Connector out: etherCON

Amplifier Cooling: Axial fan
Height (mm): 665 mm
Width (mm): 1400 mm
Length (mm): 635 mm
Material: Wood
Material Thickness: 18 mm
Colour: Black
Finish: Painted
Weight (kg): 115.5 kg
IP Rating: IP20 (indoor use only)

Pole Mount: M20
Electronic Protection: Convection-fan, Digital limiter, Overload, Thermal
LED Indicators: Clip, Data connect, Power, Protect, Signal
Speaker Grill Material: Steel
Speaker Handles Positions: Left side, Right side
Castors: Optional

Rigging Options: Stacking

Included Cables: None
Included Accessories: User Manual
Included Rigging: None

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”DAP ODIN S-218A”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.