DAP Odin SF-12A

18 495 kr

Aktiv fullrangehögtalare, 12″+1″, 800W

Artikelnr: D3930 Kategorier: , Brand:

Beskrivning

  • 800 W RMS / 128 dB SPL @ 1 m
  • 12″ Ferrite Celestion low driver
  • 1,75″ Ferrite Celestion compression driver
  • Class D amplifier with integrated DSP processor
  • Usable as stage monitor, full-range speaker & top speaker

The DAP Odin SF-12A is a versatile 12″ full-range active bi-amped speaker. Its Celestion Ferrite drivers provide a well balanced sound suitable for both on and off stage. Due to its sturdy, road-ready and extra angular design, it can be used as stage monitor, full-range speaker as well as top speaker. A combination is possible with a DAP Odin S-18A Subwoofer. The low driver has a water resistant coating to survive humid and outdoor conditions.

The SF-12A is equipped with an 800 watt RMS Class D amplifier. It can produce a staggering 128 dB SPL at 1 meter distance. This makes it more than competent for either in-fill, out-fill and drum-fill applications as well as delay speaker. It also has an integrated DSP processor that is similar to other Odin speakers and can be used with the same editor software.

The SF series includes all mounting/rigging options, both for flying (built-in M10 thread) and in combination with a speaker stand or distance pole. The rotatable horn enables the speaker to be placed both in horizontal and vertical position.

Specifications

Low Driver Power: 350 W
High Driver Power: 130 W
RMS Output Power Amplifier: 800 W
Peak Output Power Amplifier: 3200 W
Main Outputs: 1
Main Output Connector: 3-pin XLR

Mono Inputs: 1
Mono Input Connector: 3-pin XLR

THD Level: < 0.5 % Signal-to-noise Ratio > 90 dB
AD/DA Convertor Sample Rate: 48 kHz
Amp Technology: Class D
Damping Factor: 200 :1
Speaker System: 2-way
Speaker Sensitivity (1 W/1 m): 96 dB
Maximum SPL at 1 m: 128 dB
DSP Processor Bitrate: 32-bit
Frequency Response (-3dB) Minimum: 60 Hz
Frequency Response (-3dB) Maximum: 19000 Hz
Crossover Frequency High: 1600 Hz
Woofer Diameter: 12 ”
Woofer Voice Coil: 3 ”
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1 ”
Compression Driver Voice Coil: 1.75 ”
Compression Driver Magnet Type: Ferrite
Dispersion Angle Horizontal: 80°
Dispersion Angle Vertical: 60°

Equalizer Range: 30 dB
Parametric Output Equalizer: 8 Bands
Phase Reverse: Yes

User Presets: Yes
User Presets Capacity: 10

Control Mode: PC Software, Stand Alone

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 300 W
Fuse: 6.3 A
Power Connector in: powerCON Blue
Power Connector out: powerCON Grey
Data Connector in: etherCON
Data Connector out: etherCON

Amplifier Cooling: Axial fan
Height (mm): 646 mm
Width (mm): 396 mm
Length (mm): 379 mm
Material: Wood
Material Thickness: 15 mm
Colour: Black
Finish: Painted
Weight: 26 kg
IP Rating: IP20 (indoor use only)

Pole Mount: 35 mm
Electronic Protection: Convection-fan, Digital limiter, Overload, Thermal
LED Indicators: Clip, Data connect, Power, Protect, Signal
Rotatable Horn: Yes
Useable as Monitor/Wedge: Yes
Speaker Grill Material: Steel
Speaker Handles Positions: Left side, Right side

Mounting Options: Eye bolt
Mounting Positions: Horizontal, Vertical
Rigging Options: Flying
Rigging Eye Thread: M10

Included Cables: None
Included Accessories: None
Included Rigging: None

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”DAP Odin SF-12A”

Din e-postadress kommer inte publiceras.

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.