DAP ODIN T-8A

Beskrivning

• 800 W / 129 dB SPL @ 1 m
• 2x 8″ Neodymium MID Woofers
• 2x 1″ Celestion Neodymium compression drivers
• Waveguide for optimised low-mid frequency directivity
• Quick and easy setup (3-point suspension system)

The DAP Odin T-8A is a versatile 800-watt Bi-Amp Line Array Satellite Speaker, suitable for small to large crowds. They are stackable up to 4 units and hangable to up to 12 units. The variety of options allows you to set the correct sound dispersion and DSP settings according to the application and location.

The Odin T-8A is equipped with two 8″ Celestion Neodymium MID Woofers and two 1″ Celestion Neodymium compression drivers, producing up to a staggering 129 dB SPL @ 1 meter distance. It is a full-range active speaker that will work perfectly in combination with the S-18A subwoofer and S-218A ultra subwoofer. A specially designed waveguide, phase plug, and configurable DSP-optimised amplification make sure that the T-8A delivers under any circumstance and in any setup.

The handy hanging system allows you to build/break a complete Odin Line Array set in no time and on your own. In addition, it is a very modular system, so you can place a DAP Odin Line-Array installation at any location. Various accessories are available for stacking, hanging or using a sub/top combination as a satellite setup. For example, consider the 35 mm pole mount adapter, stack frame and fly bar, where the vertical array angle of satellite speakers can be adjusted in 6 steps, from a 0° to 7.5° spread angle.

Free Odin Editor software, in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and ”Throw”. A plug-in has been developed for adding our speakers to its database.

Please be aware that powerCON and network cables are not included.

Specifications

Low Driver Power: 650 W
High Driver Power: 150 W
RMS Output Power Amplifier: 800 W
Peak Output Power Amplifier: 3200 W
Main Outputs: 1
Main Output Connector: 3-pin XLR

Mono Inputs: 1
Mono Input Connector: 3-pin XLR

THD Level: < 0.5 % Signal-to-noise Ratio > 90 dB
AD/DA Convertor Sample Rate: 48 kHz
Amp Technology: Class AB & D
Damping Factor: 200:1
Speaker System: 2-way Line-Array
Speaker Sensitivity (1 W/1 m): 97 dB
Maximum SPL at 1 m: 129 dB
DSP Processor Bitrate: 32-bit
Frequency Response (-3dB) Minimum: 80 Hz
Frequency Response (-3dB) Maximum: 19000 Hz
Crossover Frequency Low: 90 Hz
Crossover Frequency High: 1600 Hz
Woofer Diameter: 8”
Woofer Voice Coil: 2”
Woofer Magnet Type: Neodymium
Compression Driver Diameter: 1″
Compression Driver Voice Coil: 1.75″
Compression Driver Magnet Type: Neodymium
Dispersion Angle Horizontal: 100°
Dispersion Angle Vertical: 10°

Equalizer Range: 30 dB
Parametric Output Equalizer: 8 Bands
Crossover Filter Types: Butterworth
Crossover Slopes: 24 dB
Phase Reverse: Yes

User Presets: Yes
User Presets Capacity: 10

Control Mode: PC Software, Stand Alone

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 300 W
Fuse: 5 A
Power Connector in: powerCON Blue
Power Connector out: powerCON Grey
Data Connector in: etherCON
Data Connector out: etherCON

Amplifier Cooling: Axial fan
Height (mm): 300 mm
Width (mm): 635 mm
Length (mm): 468 mm
Material: Wood
Material Thickness: 18 mm
Colour: Black
Finish: Painted
Weight (kg): 22.5 kg
IP Rating: IP20 (indoor use only)

Pole Mount: Optional 35 mm pole mount
Electronic Protection: Convection-fan, Digital limiter, Overload, Thermal
LED Indicators: Clip, Data connect, Power, Protect, Signal
Rotatable Horn: No
Useable as Monitor/Wedge: No
Speaker Grill Material: Steel
Speaker Handles Positions: Left side, Right side

Mounting Options: 3-point suspension
Rigging Options: Flying, Stacking

Included Cables: None
Included Accessories: User Manual
Included Rigging: None