DAP Qi-4200

6 850 kr

4-kanals installationsförstärkare, 4x 200W / 120W @ 4 / 8 ohm

Artikelnr: D4530 Kategori: Varumärke:

Beskrivning

  • Perfect sound quality and long lifespan
  • Robust steel 19″ / 1U housing
  • Suitable for either mobile and installation speakers
  • Bridge and stereo modus
  • SMPS, Class D amplification & Soft Start technology

The DAP Qi-4200 is a 4x 200 watt amplifier suitable for the DAP-Xi speaker series. Each channel has its own gain control and protect, limit and signal indicator LEDs. This amplifier is not only suitable for DAP Xi speakers but can also be applied for mobile use due to its rugged steel housing.

The Qi-4200 has 4 routable XLR inputs and speakON outputs. They can be set in either bridge and stereo mode. Equipped with SMPS and Class D amplification, it is a lightweight and energy efficient solution delivering a high quality sound signal.

This device is save to use thanks to its advanced protection circuit. It is protected from overload, overheat and clipping due to various built-in protection mechanisms, such as a softstart and clip limiter. Furthermore, the Qi-series is made with high-quality low-deviation components to ensure a long lifespan and a perfect sound quality.

Specifications

2 Ohms Stable: No
Output per channel into 8 ohms at 1 kHz: 120 W
Output per channel into 4 ohm at 1 kHz: 200 W
Bridge Output into 8 ohms at 1 kHz: 400 W
Output per channel into 8 ohm at 20 Hz > 20 kHz: 120 W
Output per channel into 4 ohm at 20 Hz > 20 kHz: 200 W
Bridge Output 8 ohm on 20 Hz > 20 kHz: 400 W
Output Channels: 4
Output Mode: 4-channel, Bridge, Stereo
Output Connector: Speaker Connector 4 pole

Mono Inputs: 4
Mono Input Connector: 3-pin XLR
Mono Balanced Input Maximum Level: 20
Mono Input Impedance: 20
Mono Unbalanced Input Sensitivity: 1 dBv

THD Level: < 0.5 %
Signal-to-noise Ratio: > 90 dB

SLEW Rate: 15 V/μs
Amp Technology: Class D
Damping Factor: 200:1
Frequency Response Minimum: 10 Hz
Frequency Response Maximum: 20 kHz

Power Supply: 100-240 VAC 50-60 Hz
SMPS Included: Yes
Power Consumption: 725 W
Fuse: 5 A
Power Connector in: IEC

Amplifier Airflow: Front to back
Amplifier Cooling: Axial fan
Height (mm): 44 mm
Width (mm): 483 mm
Length (mm): 390 mm
Installation Depth (excl. connector): 390 mm
Flightcase Size: 19″
Rack Units: 1 U
Housing: Metal
Colour: Black
Finish: Powder Coating
Weight (kg): 6.4 kg
IP Rating: IP20 (indoor use only)

Electronic Protection: Clip limiter (fixed), DC voltage, RF, Short circuit, Softstart, Thermal
LED Indicators: Clip, Power, Protect, Signal
Reference Standard: CE, EMC, ETL, FCC, RoHS

Included Cables: IEC cable
Included Accessories: Rubber feet, User Manual

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”DAP Qi-4200”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.