Telescopic lifting tower specially certified to lift loads of up to 250 kg (551.15 lb) to a maximum height of 5.20 metres (17′ 0.72″).
ASB System (Automatic Safety Blocking System)
Auto-brake Winches (AL-KO) Comply with CE Machinery Directives.
Zip/trigger safety system. Self-lubricating pulleys.
Special Epoxy anti-scratch paint finish (for outdoor use).
Internal system to prevent wobbling of the tower
Rectangular legs with chromed foot plates with non-slip injection moulded rubber pads.
Spirit level (for correct vertical adjustment)
Special non-rotating steel wire rope, with steel core, 3 times the strength required.
Top section fitted with a reinforcing ferrule.
The ELC-770 tower is manufactured with the most advanced welding equipment which guarantees the highest level of safety and strength, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift heavy loads.
ELC-770 has two safety systems which guarantee maximum reliability during the lifting and lowering procedure.
1.- It is equipped with an AL-KO CF 900 hand winch with automatic braking system. Its auto-block system ensures the load remains in position whenever the handle is released.
2.- ASB System (Automatic Safety Blocking System).
ELC-770 towers comply with the safety requirements according to the following Standards and Regulations:
> DGUV Regulation 1
> DGUV Regulation 17
> DGUV Rule 115-002
> DIN EN 10219-1
– ELC lifting towers are designed to work with a centred load.
– THE LIFT IS NOT TO BE USED AS A HOIST FOR LIFTING, SUPPORTING OR TRANSPORTING PEOPLE.
– For outdoor use, the tower must be secured with slings, wires, ropes, etc. to prevent movement caused by windy conditions and guarantee maximum stability.
Maximum Height: 5,20 m
Maxumum Load: 250 kg
Working Height: 1,75 m
Net Weight: 89 kg
Minimum Load: 25 kg
Working Base Span: Ø 2,25 m
Folded Dimensions: 54 x 54 x 175 cm
No of sections: 4
Adaptors: Ø 55 mm
Standards: 2006/42/CE, DGUV Rule 115-002 DGUV Regulation 1, 17, 18