Guil ULK-500 PLUS

Beskrivning

Lifting Tower designed to lift loads of up to 220 kg up to a maximum height of 6.5 metres

The ULK 500 PLUS may be small in size but the attention to detail put into its design is vast.

Lifting tower developed for holding heavy weights at a great height. Its user friendly, compact design and great strength, make the ULK Lift an ideal complement for any kind of event.

LOAD CAPACITY
ULK 500 PLUS Lifts are fitted with detachable steel forks of 600 x 50 x 50 mm, and have a loading height of 19 cm from the floor which makes its loading effortless. The forks are adjustable in width to adapt to all truss types.

MAST SECTION
The Lifting Tower consists of extruded aluminium mast sections. These sturdy sections are extended by means of pulleys with bearings (covered with nylatron shells) and Ø5 mm galvanised steel wire rope with steel core (Composition: 7×19+0), specially manufactured for lifting heavy loads (DIN 3060).

FORKS
ULK Lifts are fitted with detachable steel forks (600 x 50 x 50 mm/1′ 11.62″ x 1.97″ x 1.97″) and magnetic locking pins as standard, for a quick set-up.

The forks have two fundamental features:

– Adjustable design; to accommodate different load sizes.

– The forks can be removed; for a more convenient transporting and storage of the tower.

BASE
Compact base of 570 x 460 mm, manufactured in sturdy steel and finished in a textured black powder coating (Epoxy) special for outdoor use.

Base is provided with:

– 1 spirit level for a proper vertical adjustment of the tower.

– 4 heavy-duty swivel castors (2 with brakes and 2 rigid, Ø100 mm / 3.93″) for easy handling. The sturdy base is specially designed so that these lifts can be used with forklift trucks.

– 4 mast steel braces for greater lift stability and also to protect the aluminium mast sections when the lift is being moved horizontally.

Its four detachable legs, manufactured with reinforced steel (S235 JRH), come complete with leveller screw jacks that have reinforced nylon injection moulded spin handles (ergonomic design) with double thread and speed which facilitates the levelling task. Their non-slip foot plates ensure a perfect adjustment of the tower to the floor surface.

TRANSPORT
To ease its horizontal moving and its loading in vehicles, the ULK Towers have two heavy-duty wheels (Ø 100 mm).

LIFTING PROCESS
For a quick, safe and effortless lifting process our ULK Towers are equipped with an AL-KO 900 hand winch with automatic braking system, which stops the load at the desired height when the handles are released.

MAXIMUM SAFETY
ULK Lifts comply with current safety standards: DGUV Regulation 17 & 18, DGUV Rule 115-002, DIN 56950-1 and 2006/42/CE guaranteeing maximum safety and resistance, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift audio equipment. Thanks to its easy handling and its simple and quick assembly, ULK Lift can be considered as one of the most convenient and functional lifts on the market.

ULK 500 PLUS is equipped with three safety systems to guarantee maximum reliability and resistance:

1.- It is provided with a AL-KO 900 hand winch with automatic braking system. Load remains in position whenever the handle is released.

2.- ASB System (Automatic Safety Blocking System): Consisting of safety knobs which permit the user to block and unblock each of the mast sections.

3.- IPB System (Internal Pendulum Brake): Consists of an internal pendulum system that is automatically activated on each mast section if they were to suddenly fall, which can be easily unblocked by a trigger on each profile.

IMPORTANT: THE LIFT IS NOT TO BE USED AS A HOIST FOR LIFTING, SUPPORTING OR TRANSPORTING PEOPLE.

CAUTION: For outdoor assemblies, the tower must be secured with slings, wires, ropes, etc. to prevent movement caused by windy conditions and guarantee maximum stability.

Specifications

Maximum Height 6.30 m
Maximum Load 220 kg
Safety Systems ASB System (Automatic Safety Blocking System)
IPB System (Internal Pendulum Brake) + MSU System
Brake Winch AL-KO 900 (900 Kg)
Height stowed 1.70 m
Horizontal Transport Included (2 x Ø 100 mm wheels)
Wheels Secured to the base with 4 fixing points
Leveller screw jacks Trapezoidal thread TR24x5.
Greater durability and speed
Material Aluminium (alloy EN AW 6082-T6) & Steel. BLACK Colour
Complies with Standards DGUV 17 & 18, DGUV Rule 115-002 (Formerly BGV-C1)
DIN EN 17206 (Replaces DIN 56950-1), 2006/42/CE
Net Weight 117 kg
Sections 5 Sections – Profile dimension (width): 135 mm