Novastar CVT 320 Fiberconverter

4 050 kr

Fiberkonverterare att använda vid stora avstånd mellan videoprocessor och LED-skärmar

Artikelnr: 101641 Kategori: Varumärke:

Beskrivning

  • Fiber converter to cover large distances between processor and LED screens
  • Transmission distance up to 15KM.
  • Plug and play, no driver required

When you need to cover a large distance between your Novastar processor and LED screen the CVT 320 is the ideal solution for you. The Novastar CVT320 can be used either as transmitter or as receiver. Due to the LC interface it is very easy to connect it to any fiber source.
To transfer signal from one sending-card output to the designated LED screen you always need two CVT320 units (TX transmitter and RX receiver). The fiber converter is plug and play and no further drivers are required.

Specifications

SFP Module Fibre Connector Type: LC
SFP Module(s) Included: Yes
Fibre Mode: Single-mode

Control System: Novastar
Port Mapping: Software Based

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 16
Power Connector in: IEC
Data Connector in: RJ45

Width (including handles): 149
Width (without handles): 119
Height (including handles): 132
Height (without handles): 132
Depth (including handles): 38
Depth (without handles): 38
Weight: 0.7
IP Rating: IP20 (indoor use only)
Housing: Aluminum
Colour: Black

Cooling: Passive
Maximum Ambient Temperature: 60
Minimum Ambient Temperature: -20
Operating Humidity: 0-95

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Novastar CVT 320 Fiberconverter”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.