Powersoft Duecanali 1604 DSP+D

29 500 kr

Digital förstärkare med DSP, 2x 1000W / 800W / 800W @ 2 / 4 / 8 ohm

Artikelnr: POW-DUECANALI-1604-DSP Kategori: Varumärke:

Beskrivning

Providing access to all functions yet easily set up, the Duecanali Series is versatile in use. Powersoft’s legendary efficency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.

The Duecanali 1604 is designed to work with lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.

A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and Armonía Pro Audio Suite™ software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.

General
Number of channels: 2
Output power:
Single channel mode: 1000W / 800W / 800W @ 2 / 4 / 8 Ω
Distributed line*: 800W / 800W @ 70V / 100V
Bridge mode: 2000W / 1600W @ 4 / 8 Ω
Max output voltage / current: 115 Vpeak / 45 Apeak

AC Main Power
Power supply: Universal, regulated switch mode with PFC
Nominal power requirement: 100-240 V ±10%, 50-60 Hz
Operating voltage: 90 V – 264 V

Power consuption**: 230 V
Idle: 24 W / 0.28 A
1/8 of max output power @ 4 Ω: 285.3 W / 1.78 A
1/4 of max output power @ 4 Ω: 549.2 W / 2.84 A

Thermal:
Operating temperature range: 0° – 45° C
Thermal dissipation**
Idle: 81.9 BTU/h / 20.6 kcal/h
1/8 of max output power @ 4 Ω: 291.2 BTU/h / 73.4 kcal/h
1/4 of max output power @ 4 Ω: 509.4 BTU/h / 128.4 kcal/h

AUDIO
Gain: 26 dB 29 dB 32 dB 35 dB
Input sensitivity: 0.4 V / 2.84 V / 2.0 V / 1.42 V
Max input level: 20 dBu / 20 dBu / 20 dBu / 20 dBu

Frequency response: 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω or (±2.5 dB) @ 32W, 70V lines / 65 W, 100V lines
S/N ratio: > 109 dB (20 Hz – 20 kHz, A weighted)
Crosstalk separation: <70 dB @ 1kHz
THD+N: < 0.1% from 0.1 W to full power (typically <0.05%)
IMD: < 0.05% from 0.1 W to full power (typically <0.05%)
Input impedance: 20 kΩ balanced
Slew rate: >50 V/μs @ 8Ω, input filter bypassed
Damping factor: > 500 @ 20-100 Hz (Lo-Z)

DSP
DSP architecture: TI C6000 DSP platform
AD Converter: 24bit @ 48 kHz Tandem® architecture, 125 dB dynamic range
DA Converter: 24bit @ 48 kHz Tandem® architecture, 117 dB dynamic range
Internal precision: 32 bit floating point
Latency: 2.5 ms fixed latency architecture
Input equalizer: Raised-cosine, custom FIR, param. IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop hi/lo-pass
Output equalizer: Linear phase (FIR), hybrid (FIR-IIR), Bessel: 6 dB/oct to 48 dB/oct (IIR)
Crossover: Butterworth, Linkwitz-Riley
Delay: up to 100 ms per output
Limiters: Peak, RMS voltage, RMS current, TruePower™
Damping control: Active DampingControl™, LiveImpedance™ measurement

Front panel
Indicators and Controllers:
1 x LED – Status
1 x LED – Over-temperature protection
1 x LED bar – Signal level + CLIP
1 x LED bar – Signal level and over-temperature protection
1 x Knob – Level attenuator (continuous)
1 x Push-button – Setting operating parameters
1 x Push-button – Preset selector
1 x DIP switch – Toggle energy save on/off per channel pair
1 x Power switch

Connectors
AC main: 1 x IEC C20 connector – 20 A max (region-specific power cord provided)
Audio signal input: 2 x 3 pin Phoenix MC 1.5/3-ST-3.81 – Signal input – MAIN
Alarm: 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Alarm connector
Remote command: 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 – Remote on/off switch and aux voltage
Network/data: 1 x USB plug – USB connection, 1 x Rj45 socket – RS485 data connection (non-DSP version), 1 x Rj45 socket – DANTE®

Rear panel
Indicators and Controllers: 1 x DIP switch – Toggle lo/hi impedance connection, 1 x DIP switch – Toggle 70V/100V distributed line nominal voltage, 1 x DIP switch – Toggle High Pass Filter, 1 x DIP switch – Toggle 35Hz/70Hz HPF cutting frequency
Audio
Amplifier: Highly efficient Powersoft Class D circuitry

Dimensions (L x H x W): 483 mm x 44.45 mm x 360 mm (19.0 in x 1.8 in x 14.2 in)
Weight: 7 kg (15.4 lb)

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Powersoft Duecanali 1604 DSP+D”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.