Wentex UCA-PIP2 Pipe & Drape Case 45cm base

22 795 kr

Flightcase för Pipe & Drape 45cm base

Artikelnr: D7555 Kategori: Varumärke:

Beskrivning

  • Designed for Pipe & Drape
  • Stores all components for a 24-m (78-ft) wide setup
  • Hinged lid

This case is designed to store all components of 8 complete Pipe & Drape sets with 450 x 450 mm Baseplates. With the contents of such a kit you can cover up to 24 m (78 ft). There is space reserved for the following items:

– 8 Baseplates (450 x 450 mm)
– 8 Baseplate Pins
– 8 Telescopic Uprights
– 8 Telescopic Drape Supports
– 8 Curtains
(Products not included)

Please note that the Uprights need to be placed in the back of the case and the Drape Supports go in the front compartment. The Uprights need to be placed alternatingly oriented on top of each other. Because of its weight, this case cannot be tipped. If you need a vertical solution, please have a look at our Pipe & Drape Transport Trolley (product no. 89613).

Specifications

Height (mm): 665 mm
Width (mm): 2100 mm
Depth (mm): 610 mm
Inner Height: 385 mm
Inner Width: 2050 mm
Inner Depth: 559 mm
Weight: 91.6 kg
IP Rating: IP20 (indoor use only)
Material: Wood
Material Thickness: 8 mm
Fabric: Foam
Colour: Black

Flightcase Application: Utility Case
Handles: Front, Back, Left side, Right side
Handles Type: Recessed
Packing Capacity: 8 x Upright, 8 x Drape Support, 8 x Baseplate pin 100 or/and 200 mm, 8 x Baseplate
Castors: 6
Castor Size: 100 mm
Castor Type: Swivel with brake
Latch Type: Butterfly
Hinge Type: Fixed

Included Accessories: None

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Wentex UCA-PIP2 Pipe & Drape Case 45cm base”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.