DAP HP-500

Beskrivning

• Class AB amplifier
• Efficient forced air cooling
• Bridge, parallel and stereo mode
• Full protection circuits
• 19″ / 2U design

The DAP HP-500 is a simple yet effective and safe 2x 200 watt amplifier with bridge, parallel and stereo mode, suitable for audio installations at public places, such as clubs, bars and other small venues. Its output is sufficient for everyone to sing along and dance to their favorite tunes.

The HP-500 is safe to use since it is protected from clipping, overloading and overheating. It can be built into a 19-inch rack or case and has a 2 unit height. Rubber feet are included for placement on a cabinet. A power cable is also included.

Specifications

2 Ohms Stable: No
Output per channel into 8 ohms at 1 kHz: 150 W
Output per channel into 4 ohm at 1 kHz: 200 W
Bridge Output into 8 ohms at 1 kHz: 400 W
Output per channel into 8 ohm at 20 Hz > 20 kHz: 150 W
Output per channel into 4 ohm at 20 Hz > 20 kHz: 200 W
Bridge Output 8 ohm on 20 Hz > 20 kHz: 400 W
Output Channels: 2
Output Gain: 32 dB
Output Mode: Bridge, Parallel, Stereo
Output Connector: Speaker Connector 4 pole

Mono Inputs: 2
Mono Input Connector: 3-pin XLR
Mono Input Impedance: 20 Ω
Mono Balanced Input Sensitivity: 1 dBu

THD Level: < 0.5 %
Signal-to-noise Ratio: > 100 dB
SLEW Rate: 10 V/μs
Amp Technology: Class AB
Damping Factor: 100 :1
Crosstalk: 75 dBu
Frequency Response Minimum: 10 Hz
Frequency Response Maximum: 20 kHz

Power Supply: 220V-240 VAC 50 Hz
SMPS Included: No
Power Consumption: 325 W
Fuse: 3 A
Power Connector in: IEC
Amplifier Airflow: Front to side
Amplifier Cooling: Axial fan
Height (mm): 88 mm
Width (mm): 483 mm
Length (mm): 310 mm
Installation Depth (excl. connector): 310 mm
Flightcase Size: 19″
Rack Units: 2 U
Housing: Metal
Colour: Grey
Finish: Powder Coating
Weight (kg): 8.7 kg
IP Rating: IP20 (indoor use only)

Handles: No
Electronic Protection: Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
LED Indicators: Clip, Protect, Signal
Reference Standard: CE, EMC, ETL, FCC, RoHS

Included Cables: IEC cable
Included Accessories: Rubber feet, User Manual