DAP CA-4150

Beskrivning

• Configurable built-in crossover for top-sub combination
• Class D amp, SMPT and Soft Start technology
• Advanced protection circuits & indicator LEDs
• Stereo and bridge mode
• 1U suitable for 19″ rack

The DAP CA-4150 is a 4x 150 watt amplifier with configurable built-in Crossover. Equipped with Class D technology and SMPS, the CA-4150 has all the necessary functionalities for today’s user.

This 4-channel model has terminal inputs and outputs with the option to switch between stereo and bridge mode. In addition, the gain is adjustable per channel.

When a channel signal is causing distortion, a LED signal is indicating you to decrease the source signal level. It is not only protected from clipping, but also from overloading and overheating due to soft start technology. The CA-4150 can be built into a 19-inch rack case and has a 1 unit height.

Specifications

2 Ohms Stable: Yes
Output per channel into 8 ohms at 1 kHz: 90 W
Output per channel into 4 ohm at 1 kHz: 150 W
Output per channel into 2 ohm at 1 kHz: 230 W
Bridge Output into 8 ohms at 1 kHz: 190 W
Bridge Output into 4 ohms at 1 kHz: 275 W
Output per channel into 8 ohm at 20 Hz > 20 kHz: 90 W
Output per channel into 4 ohm at 20 Hz > 20 kHz: 150 W
Output per channel into 2 ohm at 20 Hz > 20 kHz: 230 W
Bridge Output 8 ohm on 20 Hz > 20 kHz: 190 W
Bridge Output 4 ohm on 20 Hz > 20 kHz: 275 W
Output Channels: 4
Output Gain: 28 dB
Output Mode: 4-channel, Bridge, Stereo
Output Connector: Terminal

Mono Inputs: 4
Mono Input Connector: Phoenix
Mono Input Impedance: 20 Ω
Mono Unbalanced Input Sensitivity: 1 dBv

THD Level: < 0.1%
Signal-to-noise Ratio: > 96 dB
SLEW Rate: 15 V/μs
Amp Technology: Class D
Damping Factor: 180:1
Crosstalk: 70 dBu
Frequency Response Minimum: 20 Hz
Frequency Response Maximum: 20 kHz
Crossover Filter Types: Built-in Crossover

Power Supply: 220V-240 VAC 50 Hz
SMPS Included: Yes
Power Consumption: 636 W
Fuse: 5 A
Power Connector in: IEC

Amplifier Airflow: Front to back
Amplifier Cooling: Radial Fan
Height (mm): 44 mm
Width (mm): 484 mm
Length (mm): 281 mm
Installation Depth (excl. connector): 281 mm
Flightcase Size: 19″
Rack Units: 1 U
Housing: Metal
Colour: Black
Finish: Powder Coating
Weight (kg): 4.85 kg
IP Rating: IP20 (indoor use only)

Handles: No
Electronic Protection: Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
LED Indicators: Clip, Power, Protect, Signal
Reference Standard: CE, EMC, ETL, FCC, LVD, RoHS

Included Cables: IEC cable
Included Accessories: Green terminal connector, User Manual