DAP CA-4500 DSP

Beskrivning

• Suitable for the installation market (70/100 V)
• Powerful digital DSP
• Bridge and stereo mode
• SMPS & Class D technology
• OLED display and PC configurable

The DAP CA-4500 DSP is a high power digital 4-channel amplifier with 500 W in 4 Ohm and four 500 watt speakON outputs. It can drive a 70/100 V speaker system and can deliver two channels of 1000 watt each in bridge mode. This amplifier is especially suitable for the installation market.

The CA-4500 includes a powerful DSP. All parameters, such as 8-band EQ settings, delay, compression, noise gate and more, are configurable manually or via included software on any Windows PC/laptop. Besides, all four inputs and output channels are freely routable.

This amplifier not only has many functionalities but is also safe to use thanks to advanced protection circuits, such as soft start technology and a clip limiter. All of this fits in a compact 19-inch design with a 1 unit height.

Specifications

2 Ohms Stable: No
Output per channel into 8 ohms at 1 kHz: 250 W
Output per channel into 4 ohm at 1 kHz: 500 W
Bridge Output into 8 ohms at 1 kHz: 1000 W
Output per channel into 8 ohm at 20 Hz > 20 kHz: 250 W
Output per channel into 4 ohm at 20 Hz > 20 kHz: 500 W
Bridge Output 8 ohm on 20 Hz > 20 kHz: 1000 W
Output Channels: 4
Output Gain: 34 dB
Output Mode: 4-channel, Bridge, Mono, Stereo
Output Connector: Speaker Connector 4 pole

Mono Inputs: 4
Mono Input Connector: 3-pin XLR
Mono Input Impedance: 20 Ω
Mono Unbalanced Input Sensitivity: 1 dBv

THD Level: < 0.15 %
Signal-to-noise Ratio: > 96 dB
AD/DA Convertor Sample Rate: 96 kHz
Audio Latency: 1.5 ms
SLEW Rate: 25 V/μs
Amp Technology: Class D
Damping Factor: 180:1
Crosstalk: 60 dBu
Frequency Response Minimum: 20 Hz
Frequency Response Maximum: 20 kHz
Supported Operating Systems: Windows

Parametric Input Equalizer: 8 Bands
Parametric Output Equalizer: 8 Bands
Equalizer Types Input: Bell, High Shelf, Low Shelf, Notch
Equalizer Types Output: High Shelf 6, High Shelf 12, Low Shelf 6, Low Shelf 12
Crossover Filter Types: Bessel, Butterworth, Linkwitz Riley
Crossover Slopes: 6, 12, 18, 24, 30, 36, 42, 48 dB
Dynamics Type: Compressor, Gate, Limiter
Phase Reverse: Yes

User Presets: Yes

Control Mode: Manual, PC Software
Display: OLED

Power Supply: 220V-240 VAC 50 Hz
SMPS Included: Yes
Power Consumption: 1741 W
Fuse: 10 A
Power Connector in: IEC
Data Connector in: USB

Amplifier Airflow: Front to back
Amplifier Cooling: Radial Fan
Height (mm): 44 mm
Width (mm): 483 mm
Length (mm): 285 mm
Installation Depth (excl. connector): 285 mm
Flightcase Size: 19″
Rack Units: 1 U
Housing: Metal
Colour: Black
Finish: Powder Coating
Weight (kg): 5.9 kg
IP Rating: IP20 (indoor use only)
Handles: No
Electronic Protection: Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
Reference Standard: CE, EMC, ETL, FCC, RoHS
Included Cables: IEC cable
Included Accessories: Rubber feet, User Manual