DAP PSS-106

Beskrivning

• 100 watt full-range battery speaker with Bluetooth and MP3 function
• Lightweight Class-D amplifier (7 kg)
• Can be used as floor monitor, tilt back, or PA system
• 4 hours charging time and 5 hour battery life @ maximum output
• Built-in 3-channel amplifier with Bluetooth, USB, 3.5/6.3 mm jack and XLR input

The DAP PSS-106 Bluetooth MP3 Battery Speaker is a versatile mobile audio solution with a nice sounding 6.5″ woofer and 1″ tweeter. The design allows it to be used as Floor Monitor, Tilt Back or even as PA with a 35 mm tripod locker and adjustable monitor status at the bottom of the cabinet.

Equipped with a lightweight 3-channel class-D amplifier, the PSS-106 can receive two microphones and an audio source, like USB, Bluetooth device or a device with (mini)jack output. A dedicated wireless microphone, microphone receiver and beltpack are optional for providing an all-in-one audio solution.

The battery lasts up to 5 hours at full output and is fully rechargeable in 4 hours. This makes it a very convenient and trustable mobile solution for a wide variety of applications.

Please note that a PSS-106 speaker is also available with included wireless handheld microphone and built-in microphone receiver.

Specifications

Main Outputs: 1
Main Output Connector: TRS balanced 6.3 mm
Low Driver Power: 90 W
High Driver Power: 10 W
RMS Output Power Amplifier: 100 W
Peak Output Power Amplifier: 160 W

Mono Inputs: 2
Mono Input Connector: 3-pin XLR, TS unbalanced 6.3 mm
Mono Balanced Input Maximum Level: 1 dBu
Auxiliary Inputs: 1
Auxiliary Input Connector: TRS balanced 3.5 mm
Auxiliary Unbalanced Input Maximum Level: 10 dBv

Supported Audio Files: MP3
Media Input/Output: USB-A, SD Card

Amp Technology: Class D
Speaker System: Battery Operated
Maximum SPL at 1 m: 110 dB
Frequency Response Minimum: 70 Hz
Frequency Response Maximum: 20000 Hz
Frequency Response (-6dB) Minimum: 70 Hz
Frequency Response (-6dB) Maximum: 20000 Hz
Crossover Frequency High: 1900 Hz
Woofer Diameter: 6.5 ”
Woofer Voice Coil: 1.5 ”
Compression Driver Diameter: 1 ”
Compression Driver Magnet Type: Neodymium

Parametric Microphone Equalizer: 2 Bands
Microphone Input Equalizer Range: 10 dB
Microphone Input Fixed Frequencies: 100, 10.000 Hz Hz
Parametric Channel Equalizer: 2 Bands
Input Channel Equalizer Range: 10 dB
Channel Input Fixed Frequencies: 100, 10.000 Hz Hz
Built-in FX: Yes
FX Types: Reverb

Wireless Microphone Frequency Start: 863 MHz
Wireless Microphone Frequency End: 865 MHz
Bluetooth Audio Profile: A2DP

Battery Type: Lithium ion
Battery Voltage: 25.9 V
Capacity: 2.2 Ah
Runtime @Full: 5 h
Runtime Average: 8 h
Charging Time: 5 h

Display: LED

Power Supply: 220V-240 VAC 50 Hz
Power Consumption: 100 W
Fuse: 1.6 A
Power Connector in: IEC

Height (mm): 323 mm
Width (mm): 240 mm
Length (mm): 265 mm
Material: ABS
Weight: 5.9 kg
IP Rating: IP20 (indoor use only)
Colour: Black
Finish: Painted

VOX: Yes
Pole Mount: 35 mm
Cooling: Convection
Electronic Protection: Clip limiter, Overheat, Overload, Thermal
LED Indicators: Battery status, BT Pairing, Charging, Power, Protect, Signal
Speaker Grill Material: Steel
Speaker Handles Positions: Top
Castors: None

Maximum Ambient Temperature: 40 °C
Minimum Ambient Temperature: 5 °C

Included Cables: IEC cable