Powersoft Quattrocanali 1204 DSP+D

36 850 kr

Digital förstärkare med DSP, 4x 400W / 300W / 300W @ 2 / 4 / 8 ohm

Artikelnr: POW-QUATTROCANALI-1204-DSP-D Kategori: Varumärke:

Beskrivning

Quattrocanali offers the renowned sound quality and reliability of all Powersoft’s Amplifier Platforms.

The patented SRM (Smart Rails Management) technology allows up for the maximization of the system’s efficiency.

With Output Powers ranging from 300W to 1200W per channel, in-depth control, and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium-sized installation projects.

Quattrocanali 1204 offers the traditionally amazing sound quality and reliability of all Powersoft products.

The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption in any load and usage condition. Quattrocanali features the lowest thermal dissipation in the industry, reducing the need for external cooling devices.

Quattrocanali is designed to operate with lo-Z (from 2 Ω) and 70V/100V distributed lines or any mix of the two.
DSP+D versions of the Quattrocanali grant in-depth control and monitoring via ArmoníaPlus, tailoring the sound and managing the system can be done by a remote, decentralized location.

This Amplifier Platform can also be trusted in mission-critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS.

General
Number of channels 4
Output power Single channel mode Distributed line* Bridge mode
2 Ω 4 Ω 8 Ω   70V 100V 4 Ω 8 Ω    
400 W 300 W 300 W 300 W 300 W 800W 600W
Max output voltage / current 70 Vpeak / 33 Apeak
AC Main Power
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V – 264 V
Power consuption** 115 V 230 V
Idle 31.4 W 0.40 A 31.6 W 0.28 A
1/8 of max output power @ 4 Ω 301 W 2.75 A 302 W 1.65 A
1/4 of max output power @ 4 Ω 556 W 5.47 A 553 W 3.02 A
Thermal
Operating temperature range 0° – 45° C – 32° – 113° F
Thermal dissipation** 115 V 230 V
Idle 107.2 BTU/h 27.0 kcal/h 107.9 BTU/h 27.2 kcal/h
1/8 of max output power @ 4 Ω 344.8 BTU/h 86.9 kcal/h 348.2 BTU/h 87.7 kcal/h
1/4 of max output power @ 4 Ω 532.6 BTU/h 134.2 kcal/h 522.3 BTU/h 131.6 kcal/h
AUDIO
Gain 26 29 32 35
Input sensitivity 2.45 V 1.74 V 1.22 V 0.85 V
Max input level 20 dBu 20 dBu 20 dBu 20 dBu
Gate
Frequency response 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 104 dB (20 Hz – 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1kHz
THD+N <0.1% from 0.1 W to full power (typically < 0.05%)
IMD <0.05% from 0.1 W to full power
Input impedance 20 kΩ balanced
Slew rate >50 V/μs @ 8Ω, input filter bypassed
Damping factor > 500 @ 20-200 Hz
DSP
AD Converter 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range – 0.005 % THD+N
DA Converter 24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range – 0.003 % THD+N
Internal precision 32 bit floating point
Memory/presets 128 MB (RAM) plus 512 MB fash for presets /
Latency 2.5 ms fixed latency architecture
Input equalizer Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay 2 s (input) + 100 ms (output) for time alignment
Input EQ
Output EQ
Limiters TruePower™, RMS voltage, RMS current, Peak limiter
Damping control Active DampingControl™ and Liveimpedance™ measurement
Front panel
Connectors
AC main 1 x IEC C20 connector – 20 A max (region-specific power cord provided)
Audio signal input 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Signal input – MAIN
Alarm 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 – Alarm connector
1 x 4 pin Phoenix MC 1.5/4-ST-3.81 – Alarm connector
Loudspeakers 1 x 8 pin Phoenix DFK-PC 4/8-G-7.62 – Signal output
Network/data 1 x Rj45 socket – RS485 data connection (non-DSP version)
1 x Rj45 socket – DANTE®
Rear panel
Indicators and Controllers 1 x DIP switch – Toggle 70V/100V distributed line nominal voltage
1 x DIP switch – Toggle High Pass Filter
1 x DIP switch – Toggle 35Hz/70Hz HPF cutting frequency
Construction
Dimensions (L x H x W) 483 mm x 44.45 mm x 360 mm (19.0 in x 1.8 in x 14.2 in)
Weight 7 kg (15.4 lb)

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Powersoft Quattrocanali 1204 DSP+D”

Din e-postadress kommer inte publiceras. Obligatoriska fält är märkta *

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.

Relaterade produkter