DAP NRG-12

Beskrivning

• 150 W RMS, 550 W peak
• Speaker sensitivity 96 dB/W at 1 m
• Full range (60 – 20.000 Hz)
• Dual-angle speaker flange (0° and 5°)
• Lightweight (14.6 kg)

The DAP NRG-12 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 12” woofer and a 1” compression driver. With a sensitivity of 96 dB/W/m, the NRG-12 comfortably plays up to 117 dB with peaks of up to 129 dB. The compression driver is coupled to a rotatable horn with a directivity of 90° × 60°. The woofer has a low cut-off point of 60 Hertz (-6 dB).
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-12, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.

Specifications

RMS Input Power: 150 W
Peak Input Power: 550 W

Passive Input Connection: Speaker Connector 4 pole , Terminal
Passive Output Connector: Speaker Connector 4 pole

Speaker System: 2-way
Speaker Sensitivity (1 W/1 m): 96 dB
Speaker Impedance: 8 Ω
Maximum SPL at 1 m: 117 dB
Frequency Response (-6 dB) Minimum: 60 Hz
Frequency Response (-6 dB) Maximum: 20000 Hz
Woofer Diameter: 12″
Woofer Voice Coil Diameter: 2″
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1″
Compression Driver Voice Coil: 1.4″
Compression Driver Magnet Type: Ferrite
Dispersion Angle (Horizontal): 90°
Dispersion Angle (Vertical): 60°

Height (mm): 572 mm
Width (mm): 345 mm
Depth (mm): 360 mm
Material: Plywood
Weight: 14.6 kg
IP Rating: IP20 (indoor use only)
Colour: Black
Finish: Painted
Speaker Adapter Diameter: 35 mm

Useable as Monitor/Wedge: No
Speaker Grille Material: Steel
Speaker Handle Positions: Left side, Right side

Rigging Eye Thread: M8

Maximum Ambient Temperature: 40 °C