DAP NRG-8

Beskrivning

• 120 W RMS, 400 W peak
• Speaker sensitivity 93 dB/W at 1 m
• Full range (80 – 20.000 Hz)
• Dual-angle speaker flange (0° and 5°)
• Lightweight (10.3 kg)

The DAP NRG-8 is a passive full-range loudspeaker rated at 400 watts peak (120 watts continuous RMS). It uses an 8” woofer and a 1” compression driver. With a sensitivity of 93 dB/W/m, the NRG-8 comfortably plays up to 114 dB with peaks of up to 126 dB. The compression driver is coupled to a rotatable horn with a directivity of 90° × 60°. The woofer has a low cut-off point of 80 Hertz (-6 dB).
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-8, we recommend using a 4th order high-pass filter at 60 Hertz and adding an NRG series subwoofer.

Specifications

RMS Input Power: 120 W
Peak Input Power: 400 W

Passive Input Connection: Speaker Connector 4 pole , Terminal
Passive Output Connector: Speaker Connector 4 pole

Speaker System: 2-way
Speaker Sensitivity (1 W/1 m): 93 dB
Speaker Impedance: 8 Ω
Maximum SPL at 1 m: 114 dB
Frequency Response (-6 dB) Minimum: 80 Hz
Frequency Response (-6 dB) Maximum: 20000 Hz
Woofer Diameter: 8 ”
Woofer Voice Coil Diameter: 1.5 ”
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1 ”
Compression Driver Voice Coil: 1.4 ”
Compression Driver Magnet Type: Ferrite
Dispersion Angle (Horizontal): 90°
Dispersion Angle (Vertical): 60°

Height (mm): 475 mm
Width (mm): 275 mm
Depth (mm): 280 mm
Material: Plywood
Weight: 10.3 kg
IP Rating: IP20 (indoor use only)
Colour: Black
Finish: Painted
Speaker Adapter Diameter: 35 mm

Useable as Monitor/Wedge: No
Speaker Grille Material: Steel
Speaker Handle Positions: Left side, Right side

Rigging Eye Thread: M8

Maximum Ambient Temperature: 40 °C