DAP NRG-8A

Beskrivning

• 180 W RMS, 360 W peak
• 80 – 20.000 Hz frequency range
• Dedicated mic and line inputs
• Bluetooth 5.0 with True Wireless Stereo (TWS)
• Internal DSP with 4 modes

The DAP NRG-8A is an active full-range loudspeaker with a peak power of 360 watts (180 watts continuous RMS). It uses an 8” woofer and a 1” compression driver, and has an internal DSP with 4 useful modes: Contour, Flat, Speech and +Sub, which apply a loudness curve, a flat curve, a high-pass curve or a high-pass with optimised frequency and phase curve specifically for the NRG subwoofer range respectively. The compression driver is coupled to a rotatable horn with a directivity of 90° × 60°. The internal class D amplifier has a switched-mode power supply to keep the weight down and efficiency level up. The internal DSP includes a crossover for the woofer and compression driver, a 2-band limiter, a short circuit protection and thermal protection.
As well as dedicated XLR combo jacks for microphone and line-level signals, the NRG-8A has an integrated Bluetooth 5.0 receiver for playing music from your mobile phone, laptop, or other Bluetooth media player. The Bluetooth receiver features True Wireless Stereo (TWS) and can be configured to enjoy stereo sound when using a pair of NRG full-range speakers. The line output is looped through and there is an additional ‘Mix out’ output with all signals available for driving a second unit or a subwoofer, preferably from the NRG range. Separate gain controls make it easy to adjust the level of the different input signals and a master control sets the overall volume.
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. To get the most out of the NRG-8A, we recommend adding an NRG series subwoofer.

Specifications

Power Amplifier RMS Output: 180 W
Power Amplifier Peak Output: 360 W
Main Outputs: 1
Main Output Connector: 3-pin XLR

Mono Inputs: 2
Mono Input Connector: 3-pin XLR

THD Level: < 0.3 %
Signal-to-noise Ratio: > 95 dB
AD/DA Convertor Sample Rate: 48 kHz
Audio Latency: 1.2 ms
Amp Technology: Class D
Speaker System: 2-way
Speaker Sensitivity (1 W/1 m): 93 dB
Maximum SPL at 1 m: 114 dB
Frequency Response (-6 dB) Minimum: 80 Hz
Frequency Response (-6 dB) Maximum: 20000 Hz
Woofer Diameter: 8 ”
Woofer Voice Coil Diameter: 1.5 ”
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1 ”
Compression Driver Voice Coil: 1.4 ”
Compression Driver Magnet Type: Ferrite
Dispersion Angle (Horizontal): 90°
Dispersion Angle (Vertical): 60°

User Presets: Yes
User Presets Capacity: 4

Power Supply: 100-240 VAC 50-60 Hz
SMPS: Yes
Power Consumption: 120 W
Power Connector In: Power Pro Blue

Height (mm): 475 mm
Width (mm): 275 mm
Depth (mm): 280 mm
Material: Plywood
Colour: Black
Weight: 10.9 kg
IP Rating: IP20 (indoor use only)
Speaker Adapter Diameter: 35 mm

LED Indicators: BT Pairing, DSP Mode, Limit, Power, Protect, Signal
Speaker Handle Positions: Left side, Right side

Maximum Ambient Temperature: 40 °C
Maximum Surface Temperature: 50 °C

Included Cables: Power Pro Cable