DAP ODIN S-18A

36 650 kr

Aktiv Linearray subwoofer, 18″, 1500W

Artikelnr: D3901 Kategorier: , Brand:

Beskrivning

  • 1500 W / 136 dB SPL @ 1 m
  • 18″ Celestion Ferrite Magnet subwoofer with 4″ voice coil
  • Class-D Amplifier
  • Configurable DSP-optimised amplification
  • Quick and easy setup (4-point suspension system)

The DAP Odin S-18A is a versatile active Line Array Subwoofer suitable for small to big crowds. For a punchy full-range sound, you can hang or stack this 1500 W Class D subwoofer (6000 W peak) together with DAP Odin T-8A satellites by using the DAP Odin FB-02 stack bar as adapter and the DAP Odin FB-01 as fly bar.

The S-18A is equipped with an 18″ Celestion Ferrite Magnet subwoofer containing a 4″ voice coil producing up to a staggering 136 dB SPL @ 1 meter distance. The DSP settings are configurable for making sure that the S-18A delivers under any circumstance and any setup. Several DSP presets are also available, including ”Cardioid” mode.

Building a complete Odin Line Array set can be done by just one person due to its 4-point suspension system. Not only is the setup quick and labour saving, it also is a very modular system, allowing different setups to fit any location. You can use the optional 35 mm pole mount adapter to arrange a Satellite setup. Or integrate the optional stack frame or fly bar and use the suspension points to arrange a stack or Line Array setup which suits your venue best.

Free Odin Editor software in combination with the CL-4 Connect allows to adjust the EQ, gain and delay freely per speaker or group of speakers from your Windows PC/laptop. It’ll also allow you to see live information about each speaker, such as amplifier temperature and high/low output. EASE Focus 3 software can be used to calculate the Splay Angle and ”Throw”. A plug-in has been developed for adding our speakers to its database.

Please note that powerCON cables & network cable are not included but are to be ordered separately.

Specifications

Low Driver Power: 1200 W
RMS Output Power Amplifier: 1500 W
Peak Output Power Amplifier: 6000 W
Main Outputs: 1
Main Output Connector: 3-pin XLR

Mono Inputs: 1
Mono Input Connector: 3-pin XLR

THD Level: < 0.5 %
Signal-to-noise Ratio: > 90 dB

AD/DA Convertor Sample Rate: 48 kHz
Amp Technology: Class D
Damping Factor: 200:1
Speaker System: Subwoofer
Speaker Sensitivity (1 W/1 m): 98 dB
Speaker Impedance: 8 Ω
Maximum SPL at 1 m: 136 dB
DSP Processor Bitrate: 32-bit
Frequency Response (-3dB) Minimum: 41 Hz
Frequency Response (-3dB) Maximum: 110 Hz
Crossover Frequency Low: 32 Hz
Crossover Frequency High: 90 Hz
Woofer Diameter: 18
Woofer Voice Coil: 4
Woofer Magnet Type: Ferrite
Subwoofer Dispersion Angle Horizontal: 360°
Subwoofer Dispersion Angle Vertical: 180°

Equalizer Range: 30 dB
Parametric Output Equalizer: 8 Bands
Crossover Filter Types: Butterworth
Crossover Slopes: 24 dB
Phase Reverse: Yes

User Presets: Yes
User Presets Capacity: 10
Control Mode: PC Software, Stand Alone

Power Supply: 100-240 VAC 50-60 Hz
Power Consumption: 1150 W
Fuse: 4 A
Power Connector in: powerCON Blue
Power Connector out: powerCON Grey
Data Connector in: etherCON
Data Connector out: etherCON

Amplifier Cooling: Axial fan
Height (mm): 665 mm
Width (mm): 635 mm
Length (mm): 700 mm
Material: Wood
Material Thickness: 18 mm
Colour: Black
Finish: Painted
Weight (kg): 58.5 kg
IP Rating: IP20 (indoor use only)

Pole Mount: M20
Electronic Protection: Convection-fan, Digital limiter, Overload, Thermal
LED Indicators: Clip, Data connect, Power, Protect, Signal
Speaker Grill Material: Steel
Speaker Handles Positions: Left side, Right side
Castors: Optional

Mounting Options: 4-point suspension
Rigging Options: Flying, Stacking

Included Cables: None
Included Accessories: User Manual
Included Rigging: None

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”DAP ODIN S-18A”

Din e-postadress kommer inte publiceras.

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.