Beskrivning
- 100 watt full-range battery speaker with Bluetooth and MP3 function
- Lightweight Class-D amplifier (7 kg)
- Can be used as floor monitor, tilt back, or PA system
- 4 hours charging time and 5 hour battery life @ maximum output
- Built-in 3-channel amplifier with Bluetooth, USB, 3.5/6.3 mm jack and XLR input
The DAP PSS-106 Battery Speaker with Wireless Handheld Mic is a versatile mobile audio solution with a nice sounding 6.5″ woofer and 1″ tweeter. The design allows it to be used as Floor Monitor, Tilt Back or even as PA with a 35 mm tripod locker and adjustable monitor status at the bottom of the cabinet.
Equipped with a lightweight 3-channel class-D amplifier, the PSS-106 can receive two microphones and an audio source, like USB, Bluetooth device or a device with (mini)jack output. It also has a built-in microphone receiver and comes with a dedicated wireless handheld microphone.
If you want to add an extra microphone, you can expand the installation with an extra wireless handheld microphone, microphone receiver or beltpack. You have the choice to connect a wireless headset or a second handheld microphone.
The battery lasts up to 5 hours at full output and is fully rechargeable in 4 hours. This makes it a very convenient and trustable mobile solution for a wide variety of applications.
Please note that a more economic PSS-106 speaker is also available without standard built-in microphone receiver and wireless handheld microphone.
Specifications
Main Outputs: 1
Main Output Connector: TRS balanced 6.3 mm
Low Driver Power: 90 W
High Driver Power: 10 W
RMS Output Power Amplifier: 100 W
Peak Output Power Amplifier: 160 W
Mono Inputs: 2
Mono Input Connector: 3-pin XLR, TS unbalanced 6.3 mm
Mono Balanced Input Maximum Level: 1 dBu
Auxiliary Inputs: 1
Auxiliary Input Connector: TRS balanced 3.5 mm
Auxiliary Unbalanced Input Maximum Level: 10 dBv
Supported Audio Files: MP3
Media Input/Output: USB-A, SD Card
Amp Technology: Class D
Speaker System: Battery Operated
Maximum SPL at 1 m: 110 dB
Frequency Response Minimum: 70 Hz
Frequency Response Maximum: 20000 Hz
Frequency Response (-6dB) Minimum: 70 Hz
Frequency Response (-6dB) Maximum: 20000 Hz
Crossover Frequency High: 1900 Hz
Woofer Diameter: 6.5 ”
Woofer Voice Coil: 1.5 ”
Compression Driver Diameter: 1 ”
Compression Driver Magnet Type: : Neodymium
Microphone Type: Dynamic
Dynamic Range: 100 dB
Parametric Microphone Equalizer: 2 Bands
Microphone Input Equalizer Range: 10 dB
Microphone Input Fixed Frequencies: 100, 10.000 Hz Hz
Parametric Channel Equalizer: 2 Bands
Input Channel Equalizer Range: 10 dB
Channel Input Fixed Frequencies: 100, 10.000 Hz Hz
Built-in FX: Yes
FX Types: Reverb
Wireless Microphone Frequency Start: 863 MHz
Wireless Microphone Frequency End: 865 MHz
RF Power: 10 mW
RF Bandwidth: 2 MHz
Wireless Stability: 0.005%
Bluetooth Audio Profile: A2DP
Battery Type: AA, Lithium ion
Battery Voltage: 25.9 V
Capacity: 2.2 Ah
Runtime @Full: 5 h
Runtime Average: 8 h
Charging Time: 5 h
Display: LED
Power Supply: 220V-240 VAC 50 Hz
Power Consumption: 100 W
Fuse: 1.6 A
Power Connector in: IEC
Height (mm): 323 mm
Width (mm): 240 mm
Length (mm): 265 mm
Height Transmitter (mm): 48 mm
Width Transmitter (mm): 48 mm
Length Transmitter (mm): 245 mm
Material: ABS
Weight: 5.9 kg
Weight Transmitter: 0.2 kg
IP Rating: IP20 (indoor use only)
Colour: Black
Finish: Painted
VOX: Yes
Pole Mount: 35 mm
Cooling: Convection
Electronic Protection: Clip limiter, Overheat, Overload, Thermal
LED Indicators: Battery status, BT Pairing, Charging, Power, Protect, Signal
Speaker Grill Material: Steel
Speaker Handles Positions: Top
Castors: None
Maximum Ambient Temperature: 40 °C
Minimum Ambient Temperature: 5 °C
Included Cables: IEC cable
Included Accessories: Microphone Wireless
Recensioner
Det finns inga recensioner än.