DAP TA-4.3400

Beskrivning

• Compact (1U) and lightweight Class D touring amplifier
• Lo-Z (2, 4, 8 ohms), stereo and bridge modes
• DSP with 512 FIR filter taps and 8-band parametric EQ
• Full control via IP and Windows 10/11 software
• Universal SMPS (100 – 250 V AC) with PFC

The DAP TA-4.3400 is a compact and lightweight 4-channel DSP power amplifier for touring applications. In a 1U rack space it delivers 4x 3400 W into 4 ohms, is capable of driving 2-ohm loads and can be used for 70/100 V systems and bridged for even more power. Designed for low impedance and high current, it achieves over 90% efficiency with excellent stability.
The DSP can be controlled via a network connection and free PC software (Windows 10/11) and offers input delays of up to 100 ms, output delays of up to 20 ms, +/- 18 dB level matching, 4×4 audio route mixing, 8-band parametric input equalisers, 8-band parametric output equalisers, high and low pass filters, FIR filters with up to 512 taps, peak and RMS limiters, phase control and more. The amplifier supports IP and output voltage/current, temperature and protection can be monitored over the network. It also has a built-in switch that allows the network to be daisy-chained to multiple amplifiers. The LCD screen shows status and settings, which can be adjusted using the rotary knob next to it.
The universal switching power supply uses active PFC and soft-switching technology, accepts input voltages from 100 – 250 V AC and is optimised for the audio power amplifier.

Specifications

2 ohms Stable: Yes
Output per Channel into 8 ohms at 1 kHz: 2000 W
Output per Channel into 4 ohms at 1 kHz: 3400 W
Output per Channel into 2 ohms at 1 kHz: 5750 W
Bridge Output into 8 ohms at 1 kHz: 6800 W
Bridge Output into 4 ohms at 1 kHz: 11500 W
Output per Channel at 70/100 V at 1 kHz: 3400 W
Output Channels: 4
Output Mode: 4-channel, Bridge, Mono, Parallel, Stereo
Output Connector: Speaker Connector 4 pole

Mono Inputs: 4
Transformer: 70+100 V
Mono Input Connector: 3-pin XLR
Mono Input Gain Range: 21 dB
Mono Input Impedance: 20000 Ω

THD Level: < 0.05 %
Signal-to-noise Ratio: > 100 dB
Slew Rate: 50 V/μs
Amp Technology: Class D
Damping Factor: 1000 :1
Crosstalk: 90 dBu
Frequency Response Minimum: 20 Hz
Frequency Response Maximum: 20000 Hz

Supported Operating Systems: Windows 10, Windows 11

Parametric Input Equalizer: 8 Bands
Parametric Output Equalizer: 8 Bands
Input Equalizer Types: High Shelf, Low Shelf
Crossover Filter Types: Bessel, Butterworth, Linkwitz Riley
Crossover Slopes: 6, 12, 24, 48 dB

Limiter Attack Time Minimum: 1 ms
Limiter Attack Time Maximum: 2000 ms
Limiter Release Time Minimum: 20 ms
Limiter Release Time Maximum: 1000 ms
Output Delay (Max.): 30 ms
Input Delay (Max.): 100 ms

User Presets: Yes
User Presets Capacity: 40

Control Mode: PC Software
Display: LCD
Display Size: 3 ”

Power Supply: 100-240 V AC 50/60 Hz
SMPS: Yes
Power Consumption: 3290 W
Power Connector In: Schuko Plug
Data Connector In: RJ45

Amplifier Airflow: Front to back
Amplifier Cooling: Axial fan
Height (mm): 45 mm
Width (mm): 483 mm
Length (mm): 455 mm
Installation Depth (Excl. Connector): 455 mm
Flightcase Size: 19″
Rack Units: 1 U
Housing: Steel
Colour: Black
Finish: Powder Coating
Weight: 13,2 kg
IP Rating: IP20 (indoor use only)

Handles: No
Electronic Protection: Clip limiter, DC voltage, Overheat, Overload, Under voltage

Maximum Ambient Temperature: 40 °C
Minimum Ambient Temperature: -15 °C
Maximum Surface Temperature: 70 °C

Included Cables: Fixed Cable