DAP ADI-200

620 kr

Aktiv DI box

Artikelnr: D1943 Kategori: Brand:

Beskrivning

  • Road proof housing with rubber feet
  • Low distortion
  • Ground lift & 20 dB Attenuation switch
  • Works with 9 V battery or phantom power
  • Signal can be driven up to long cable lengths without any problems

The DAP ADI-200 active DI box helps you with instruments with a low volume level and a high impedance output. It converts an instrument output to a stronger signal without adding any distortion, interference or noise.

With the ADI-200, for example, you can use long cables without any problems while retaining a clean and undistorted signal. It is therefore a reliable system for on-stage. It works on a 9 volt battery or via phantom power and is equipped with a ground lift function and a 20 dB attenuation switch.

Specifications

Mono Inputs: 1
Mono Input Connector: 3-pin XLR, TS unbalanced 6.3 mm
Mono Input Impedance: 250 Ω

Main Outputs: 1
Main Output Connector: 3-pin XLR, TS unbalanced 6.3 mm

THD Level: < 0.005 %
Signal-to-noise Ratio: > 105 dB

Frequency Response Minimum: 10 Hz
Frequency Response Maximum: 40 Hz
Phantom Power: 18 V, 24 V, 48 V

Attenuation: -20dB

Battery Type: 9 V block PP3
Battery Voltage: 9 V

Height (mm): 55 mm
Width (mm): 135 mm
Length (mm): 145 mm
Housing: Magnesium die-cast
Weight (kg): 0.65 kg
IP Rating: IP20 (indoor use only)
Colour: Black

LED Indicators: Power

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera ”DAP ADI-200”

Din e-postadress kommer inte publiceras.

Denna webbplats använder Akismet för att minska skräppost. Lär dig hur din kommentardata bearbetas.