DAP ODIN T-8

Beskrivning

• 800 W / 129 dB SPL @ 1 m
• 2x 8″ Neodymium MID Woofers
• 2x 1″ Celestion Neodymium compression drivers
• Waveguide for optimised low-mid frequency directivity
• Quick and easy setup (3-point suspension system)

The DAP Odin T-8 is a versatile 800-watt Passive Line Array Satellite Speaker, suitable for small to large crowds. It is stackable up to 4 units and can be flown to up to 12 units. The variety of stack and fly options allows you to set the correct sound dispersion for every application and location.

The Odin T-8 has two 8” Celestion Neodymium MID Woofers and two 1” Celestion Neodymium compression drivers, producing up to a staggering 129 dB SPL at 1 meter distance. It has an internal crossover frequency of 1800 Hz and can be bi-amped. A switch allows for a 3-dB boost of the high frequencies. It will work perfectly in combination with the S-18 passive subwoofer and the active S-18A subwoofer and S-218A ultra subwoofer. A specially designed waveguide and phase plug optimise the dispersion and frequency curve to ensure that the T-8 delivers under any circumstance and in any setup.

The hardware for flying the system allows for a single person to build and take down a full Odin Line Array set in no time. In addition, it is a very modular system, so you can place a DAP Odin Line-Array installation at any location. Several accessories are available for stacking, flying, or using a sub/top combination as a satellite setup. For example, consider the 35 mm pole mount adapter, stack frame and fly bar, where the vertical array angle of satellite speakers can be adjusted in 6 steps, from a 0° to 7.5° angle.

Specifications

RMS Input Power: 800 W
Peak Input Power: 1200 W
Passive Input Connection: Speaker Connector 4 pole

Passive Output Connector: Speaker Connector 4 pole

Speaker System: 2-way Line-Array
Speaker Sensitivity (1 W/1 m): 97 dB
Speaker Impedance: 8 Ω
Maximum SPL at 1 m: 129 dB
Frequency Response (-3 dB) Minimum: 80 Hz
Frequency Response (-3 dB) Maximum: 19000 Hz
Crossover Frequency (High): 1800 Hz
Woofer Diameter: 8 ”
Woofer Voice Coil Diameter: 2 ”
Woofer Magnet Type: Ferrite
Compression Driver Diameter: 1 ”
Compression Driver Voice Coil: 1.75 ”
Compression Driver Magnet Type: Neodymium
Dispersion Angle (Horizontal): 100°
Dispersion Angle (Vertical): 10°

Height (mm): 300 mm
Width (mm): 649 mm
Depth (mm): 465 mm
Material: Plywood
Weight: 20.7 kg
IP Rating: IP20 (indoor use only)
Colour: Black
Speaker Adapter Diameter: 35 mm

Rotatable Horn: No
Useable as Monitor/Wedge: No
Speaker Grille Material: Steel
Speaker Handle Positions: Back, Left side, Right side

Mounting Options: 3-point suspension
Rigging Options: Flying, Stacking

Maximum Ambient Temperature: 40 °C